![background image](http://html1.mh-extra.com/html/conair/carousel-plus-w-series/carousel-plus-w-series_user-manual_2649066031.webp)
I n s t a l l a t i o n l
3 - 1 1
3
In
s
ta
ll
a
ti
o
n
C o n n e c t i n g t h e A f t e r c o o l e r
( O p t i o n a l )
The aftercooler and optional precooler require a source of city, tower, or chiller water and a
discharge or return line. You can use water at temperatures of 45 to 85°F {7 to 29°C}. But
the water flow should be at least 3 gal/min {11.4 liters/min}. See Appendix B for installa-
tion and water connection instructions for the optional precooler.
1
Secure the aftercooler assembly in the after-
cooler housing
using the six screws.
2
Connect the water supply line to the aftercool-
er inlet.
If a manual shut off valve is used, it
should be mounted on
the inlet line.
3
Connect the water discharge or return line
to
the aftercooler outlet.
IMPORTANT: Turn the water off when the dryer is not in use to preventcondensation.
✒
TIP:
Make the water supply and dis-
charge / return connections with
flexible hoses at least 24 in.
{61 cm} long. This allows you to
easily remove the aftercooler
assembly for cleaning.
✒
TIP:
If an optional flow control is also
being installed with the aftercooler,
the manual shut off valve should be
installed on the inlet line for the flow
control.
Aftercooler
Summary of Contents for Carousel Plus W Series
