![background image](http://html1.mh-extra.com/html/conair/carousel-plus-w-series/carousel-plus-w-series_user-manual_2649066027.webp)
I n s t a l l a t i o n l
3 - 7
3
In
s
ta
ll
a
ti
o
n
( C o n t i n u e d )
C h e c k i n g f o r P r o p e r A i r F l o w
( c o n t i n u e d )
3
Press the “I/O Setup” button and then the “I/O Test” button
.
4
Press the power button beside “Dryer I/O Test Mode” to enable test mode.
5
Press the “Delivery Air Blower”
power button to start the blower.
Press the button again after about
one second to stop the blower.
6
Hold your hand near the delivery
air outlet.
You should feel air blowing
out of the outlet.
7
If air flow is incorrect disconnect
power, follow proper lockout proce-
dures and swap any 2 of the 3 main
power wires.
NOTE:
On initial test (first time
in Dryer I/O Test Mode) the
process blower will automati-
cally start. Press the button
beside “Delivery Air Blower” to
stop the blower.
✐
CAUTION: Hot surface
Do not place
your hand directly on the delivery air
outlet. The outlet and the air can get
hot enough to burn your hand.
Moisture
Exhaust
Return
Air Inlet
Dry Delivery
Air
Summary of Contents for Carousel Plus W Series
