Software Components and SAN Management
4-11
ServerNet II Switch
Under the SERVERNET II header bar, select ServerNet II Switch to display information for a
ServerNet II Switch. (In this example, the two Switches were named X-Switch and Y-Switch.
The X-Switch was selected to view its properties.)
NOTE:
Switch names are user-defined in the ServerNet II Administrative Utility (SANUtil) during
configuration.
NOTE:
ServerNet II Switch information is only accessible from the primary administrative node, not from
the end nodes.
NOTE:
Select
?
for Help on any screen for definitions of the ServerNet II statistics or status values that
are displayed.