E-8
ServerNet II PCI Adapter and Switch Installation Guide
Table E-2
SANMan Event Log Messages
continued
Event ID
Type
Event Message and Corrective Action
0xE
Information
Event Message: Local ServerNet ID found and validated with switches.
Corrective Action: None.
0x1A
Error
Event Message: TCM component of SANMan failed due to inability to allocate memory for
local server order pool.
Corrective Action: Increase the physical memory. If the problem persists, contact your
service provider.
0x1B
Error
Event Message: TCM component of SANMan failed due to inability to start its worker
threads.
Corrective Action: Check the Windows 2000 installation for the correct NT version and
reboot the machine.
0x1C
Error
Event Message: TCM component of SANMan unable to defer request as no local server
orders left.
Corrective Action: Check the SAN for a loose connection and reboot the machine.
0x1D
Error
Event Message: Primary SANMan node cannot find itself in the RTD.
Corrective Action: Re-install SANMan on the SAN Administrative node with the correct
host name.
0x1E
Error
Event Message: Primary SANMan node not able to add itself to the RTD.
Corrective Action: Re-install SANMan on SAN Administrative node with the correct host
name.
If the problem persists, increase the physical memory of the system and reboot.
If the problem still persists, contact your service provider.
0x2A
Error
Event Message: ServerNet IDs from RTD and X and Y switches are not identical.
Corrective Action: Verify that the X-fabric and Y-fabric Switches are correctly installed to
the SAN and powered on.
Check the connections and reboot.
0x2B
Error
Event Message: Failed to read valid RTD from Registry (first time for primary SANMan).
Corrective Action: Reinstall SANMan on the node because the SANMan registry entries are
incorrect.
0x2C
Event Messages: RTD read from registry failed sanity checks.
Corrective Action: Reinstall SANMan on the node because the SANMan registry e entries
are incorrect. If the problem persists, contact your service provider.
continued