Reference Guide
7-5
Writer: Dianne Fielden Saved By: Troy Witte Saved Date: 07/02/97 4:23 PM
Pages: 20 Words: 3631 Template: c:\template\commercial\comm.dot
File Name Ch7.doc Part Number 288393-001
Solving Disk Problems
continued
Problem
Cause
Solution
Computer configuration does
not recognize second diskette
drive.
Use Computer Setup to enable the
second diskette drive. Choose the
Storage option, under Built-in
Devices, to reconfigure the drive.
Nonsystem disk message
The system is trying to start
from a diskette that is not
bootable.
Remove the diskette from the drive.
Solving Display
Problems
If you encounter display problems, refer to the documentation
that came with your monitor and to the common causes and
solutions listed in the following table.
Problem
Cause
Solution
Blank screen
Monitor is not turned on and
the monitor light is not on.
Turn on the monitor and check that
the monitor light is on.
The cable connections are not
correct.
Check the cable connection from the
monitor to the computer and to the
electrical outlet.
The QuickBlank feature has
been enabled through
Computer Setup.
Run Computer Setup and disable the
QuickBlank feature.
The energy saver feature has
been enabled.
Hit any key or type your password.
The RGB (Red, Green, Blue)
input switch on the back of the
monitor is incorrectly set.
Set the monitor's RGB input switch to
75 ohms and, if there is a sync
switch, set it to External.
You are using a fixed-sync
monitor and it won't sync at the
resolution chosen.
Be sure that the monitor can support
the selected resolution and refresh
rate.
Monitor does not function
properly when used with
energy saver features
Monitor without energy saver
capabilities is being used with
energy saver features enabled.
Disable monitor energy saver feature.
continued
