background image

A-6

     

Agency Regulatory Notices

Writer:  Dianne Fielden    Saved by: Alyce Klingler-Castle    Saved date: 05/29/97 3:51 PM

Pages: 8    Words: 1703    Template: c:\template\commercial\commapp.dot

File Name Appa    Part Number 288393-001

Battery Notice

!

WARNING:

  This computer contains an internal lithium battery–

powered real-time clock circuit. There is a risk of explosion and
injury if the battery is incorrectly replaced or handled improperly.
Do not attempt to recharge, disassemble, immerse in water, or
dispose of it in fire. Replacement should be done by a Compaq
authorized service provider using the Compaq spare part for this
computer.

In North America, dispose of nickel metal hydride or lithium-
ion batteries by taking advantage of the Compaq battery
recycling program. You will be provided with a postage-paid
battery pack mailer preaddressed to a reclamation facility where
the metals are recycled.

In Europe, do not dispose of batteries with general household
waste. Dispose of or recycle them by using the public collection
system or returning them to Compaq, your authorized Compaq
Partners, or their agents.

Power Cord Set
Requirements

Line switching allows the computer to operate from either a
100-120V or 220-240V input line.

The power cord set (power cord) you received with your
computer meets the requirements of the country where you
purchased the system. If you use the computer in another
country, you must use a power cord that meets the requirements
of that country. For more information on power cord set
requirements, contact your Compaq authorized dealer, reseller,
or service provider. The following information explains the
requirements for power cord set selection:

Summary of Contents for Deskpro 4000S - Desktop PC















































































































































Reviews: