manualshive.com logo in svg

Compaq Deskpro 4000S - Desktop PC, Reference Manual

Share
Download
Compaq Deskpro 4000S - Desktop PC Reference Manual Download Page 17

Reference Guide     

2-3

Writer: Dianne Fielden    Saved By: Troy Witte    Saved Date: 07/17/97 8:49 AM

Pages: 27    Words: 5846    Template: c:\template\commercial\comm.dot

File Name Ch2.doc    Part Number 288393-001

Using Enhanced Compaq Insight Personal Edition

To use Enhanced Compaq Insight Personal Edition (Diagnostics
for Windows), complete the following steps:

  1.  Double-click the Enhanced Compaq Insight Personal

Edition icon, located in the Control Panel.

  

The screen displays an overview of the computer hardware
and software.

  2.  For specific hardware and software information, select a

category from the Category menu or from the toolbar.

✎

As you move your cursor over the toolbar icons, the
corresponding category names appear near the cursor.

  3.  To display more detailed information in a selected

category, click More in the Information Level box.

✎

Categories or items of information displayed by Enhanced
Compaq Insight Personal Edition are similar to, but may
vary slightly from, the information presented in View
System Information (INSPECT).

  4.  Review, print, and, if necessary, discuss this information

with your authorized Compaq reseller or service provider.

✎

To print the information, click File, then select Print.
Select one of the following options: Detailed Report (All
Categories), Summary Report (All Categories), or Current
Category. Click OK to print the report you selected.

  5.  To exit Enhanced Compaq Insight Personal Edition, click

File, then click Exit.

Summary of Contents for Deskpro 4000S - Desktop PC















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands