Compaq Deskpro 4000S - Desktop PC, Reference Manual

Page: 47 / 142

Reference Guide 3-5
Writer: Dianne Fielden Saved By: Alyce Klingler-Castle Saved Date: 05/30/97 9:53 AM
Pages: 6 Words: 880 Template: c:\template\commercial\comm.dot
File Name Ch3.doc Part Number 288393-001
4. Select Media Speed and change the value from AUTO to
10Mbs or 100Mbs, depending on the capabilities of your
network.
5. Select Duplex Settings and change the value from AUTO
to Full or Half, depending on the capabilities of your
network.
6. Exit the Network control application.
You will be prompted to restart your computer in order for
the changes to take affect.
Installing the
Network Drivers
The device drivers in the network software enable the computer
to communicate with the network.
✎
Device drivers are supplied for Windows 95. If you are
using another operating system, device drivers may be
installed from diskettes included with the network
operating system or are available from Compaq. If
reinstallation ever becomes necessary, use your backup
diskettes and complete the following installation
instructions. If you did not create your backup diskettes,
then order these diskettes from Compaq, using the
information in Chapter 2, “Using Intelligent
Manageability.”
Complete instructions for installing the network device drivers
are available in the file: C:\CPQNET\README.TXT.
Changing the Default Configuration
To change the default configuration settings, run the Computer
Setup utility. Refer to Chapter 6, “Using Compaq Utilities,” for
more information.