manualshive.com logo in svg

Compaq Deskpro 4000S - Desktop PC, Reference Manual

Share
Download
Compaq Deskpro 4000S - Desktop PC Reference Manual Download Page 137

Reference Guide

     

H-1

Writer: Dianne Fielden    Saved by: Dianne Fielden    Saved date: 05/16/97 9:22 AM

Pages: 2    Words: 262    Template: c:\template\commapp.dot

File Name Apph    Part Number 288393-001

appendix  

H

R

EPLACING THE 

B

ATTERY

The real-time clock battery that came with the computer is
nonreplaceable and is permanently installed on the system
board.

!

WARNING:

  The system board contains a clock/CMOS lithium

battery. The lithium battery may explode if mistreated. The battery
is soldered into place and may not be removed. Do not abuse or
disassemble. Use only replacement batteries supplied by Compaq
Computer Corporation.

✎

  It is important to make a set of backup diagnostic diskettes

before you install a new battery.

To install the external real-time battery, complete the following
steps:

  1.  Prepare the computer for disassembly.

  2.  Remove the system unit cover .

  3.  Connect the new battery to pins 9 and 12 on the P14

battery header connector. When this battery is connected,
the internal battery is automatically disconnected.

Summary of Contents for Deskpro 4000S - Desktop PC















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands