manualshive.com logo in svg

Compaq Deskpro 4000S - Desktop PC, Reference Manual

Share
Download
Compaq Deskpro 4000S - Desktop PC Reference Manual Download Page 61

Reference Guide     

5-9

Writer: Dianne Fielden    Saved By: Troy Witte    Saved Date: 06/18/97 11:06 AM

Pages: 18    Words: 2258    Template: c:\template\commercial\comm.dot

File Name Ch5.doc    Part Number 288393-001

Installing an

Expansion Board

Your Deskpro 4000S Personal Computer has a single PCI/ISA
combination expansion slot located on the expansion card cage.
To install an expansion board, complete the following steps:

  1.  Prepare the computer for disassembly.

  2.  Remove the system unit cover.

  3.  Remove the expansion card cage.

  4.  Remove the retaining screw that secures the slot cover to

the expansion card cage. Install the expansion board.

  5.  Reinstall screws to secure the board.

✎

When you install an expansion board, make sure you
press firmly on the board so that the whole connector
seats properly in the expansion board slot.

Upgrading Memory

Memory may be expanded by replacing or adding up to two
dual inline memory modules (DIMMs) at a time onto the
system board.

✎

Your Deskpro 4000S Personal Computer can accept
standard DIMMs or ECC DIMMs or a combination of
both.

CAUTION:

  Static electricity can damage the electronic

components of the computer or optional boards. Before beginning

these procedures, ensure that you are discharged of static

electricity by briefly touching a grounded metal object.

CAUTION:

  When handling a memory module, be careful not to

touch any of the contacts. Doing so can damage the module.

Summary of Contents for Deskpro 4000S - Desktop PC















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands