manualshive.com logo in svg

Compaq Deskpro 4000S - Desktop PC, Reference Manual

Share
Download
Compaq Deskpro 4000S - Desktop PC Reference Manual Download Page 38

2-24

     Using Intelligent Manageability

Writer: Dianne Fielden    Saved by: Troy Witte    Saved date: 07/17/97 8:49 AM

Pages: 27    Words: 5846    Template: c:\template\commercial\comm.dot

File Name Ch2.doc    Part Number 288393-001

✎

Both the CD and the web site include The Locator with
Decision Support, a comprehensive listing of the device
drivers, utilities, flashable ROM images, and more,
categorized by operating system, personal computer
family, and model for easy retrieval. Decision Support
provides detailed information for each piece of support
software, including descriptions, features, enhancements,
dependencies, and update criticalities.

■ 

You can purchase backup diskettes.

If you choose to purchase the Support Software CD, you have
two options:

■ 

You can purchase a single CD-ROM that gives you one-
time access to the latest support software (North America
only).

■ 

You can purchase a yearly subscription that delivers up to
12 monthly CD-ROMs.

The annual subscription ensures your continuous access to the
latest developments.

To order the CD or backup diskettes, call the appropriate
number found in the “Worldwide Telephone Numbers” table in
Chapter 7, “Troubleshooting.”

✎

If you call Compaq to place an order, be sure to have the
serial number of your computer available. The serial
number is located on the system unit cover, right leg,
bottom front. This number is necessary for all purchases.

Compaq Integrated Software

The Support Software CD for Compaq Desktop, Portable, and
Workstation Products and the Compaq World Wide Web site
(www.compaq.com) include bundles of appropriate support
software ready for automated installation on top of an off-the-
shelf Microsoft operating system. You can use these software
bundles to quickly and easily install the correct device drivers
and other software required for top performance. The bundles
also allow you to reinstall the software originally installed on
your Compaq Deskpro 4000S.

Summary of Contents for Deskpro 4000S - Desktop PC















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands