Compaq Deskpro 4000S - Desktop PC Reference Manual Download

Page: 67 / 142

Reference Guide

5-15

Writer: Dianne Fielden Saved By: Troy Witte Saved Date: 06/18/97 11:06 AM

Pages: 18 Words: 2258 Template: c:\template\commercial\comm.dot

File Name Ch5.doc Part Number 288393-001

Installing a CD-ROM Drive

To install an optional Slimline 20X CD-ROM drive, complete
the following steps:

1. Install two guide screws on each side of the drive.

✎

Screws on the left (latch side) are shoulder-head screws.
Screws on the right side are hi-top screws.

Installing Guide Screws in the CD-ROM Drive

2. Install the CD-ROM adapter onto the back of the drive.

3. Position the guide screws on the drive into the J-slots in

the drive bay. Slide the drive toward the front of the
computer.

✎

Ensure that the spring-loaded locking lever properly
secures the drive.

4. Raise the Easy Access Drive Bay to the upright position

and connect the flat ribbon data cable to the system board.

Summary of Contents for Deskpro 4000S - Desktop PC















































































































































Search results

Summary of Contents for Deskpro 4000S - Desktop PC

Reviews:

Related manuals for Deskpro 4000S - Desktop PC

Brands by name

Popular brands

Compaq Deskpro 4000S - Desktop PC, Reference Manual

Search results

Summary of Contents for Deskpro 4000S - Desktop PC

Reviews:

Related manuals for Deskpro 4000S - Desktop PC

Brands by name

Popular brands