Compaq Deskpro 4000S - Desktop PC Reference Manual Download

Page: 63 / 142

Reference Guide

5-11

Writer: Dianne Fielden Saved By: Troy Witte Saved Date: 06/18/97 11:06 AM

Pages: 18 Words: 2258 Template: c:\template\commercial\comm.dot

File Name Ch5.doc Part Number 288393-001

4. Press out on both latches of the DIMM socket at the same

time

. This releases the module and partially pushes it out

of the socket.

5. Lift the module from the socket.

6. To install a memory module, reverse the procedure. Push

the module down

into the socket, ensuring that it is fully

inserted and properly seated

Inserting a Memory Module

✎

When the computer starts up, it will recognize the system
memory upgrade and automatically reconfigure the system.

Summary of Contents for Deskpro 4000S - Desktop PC















































































































































Search results

Summary of Contents for Deskpro 4000S - Desktop PC

Reviews:

Related manuals for Deskpro 4000S - Desktop PC

Brands by name

Popular brands

Compaq Deskpro 4000S - Desktop PC, Reference Manual

Search results

Summary of Contents for Deskpro 4000S - Desktop PC

Reviews:

Related manuals for Deskpro 4000S - Desktop PC

Brands by name

Popular brands