Compaq Deskpro 4000S - Desktop PC Reference Manual Download

Page: 138 / 142

H-2

Replacing the Battery

Writer: Dianne Fielden Saved by: Dianne Fielden Saved date: 05/16/97 9:22 AM

Pages: 2 Words: 262 Template: c:\template\commapp.dot

File Name Apph Part Number 288393-001

Replacing the External Battery

The battery connector is keyed for proper installation.

4. Remove the backing from the adhesive on the hook-and-

loop fastener strip attached to the battery, and attach the
battery as shown.

5. Replace the system unit cover.

6. Place the sticker contained in the battery kit onto the back

of the computer above the power connector.

7. Reconnect any external devices and plug in the computer.

8. Turn on the computer.

9. Run the Computer Setup utility to reconfigure the system.

Refer to Chapter 6, “Using Compaq Utilities.”

WARNING:

This equipment is designed for connection to a

grounded (earthed) outlet. The grounding type plug is an important
safety feature. To avoid the risk of electrical shock or damage to
the equipment, do not disable this feature.

Summary of Contents for Deskpro 4000S - Desktop PC















































































































































Search results

Summary of Contents for Deskpro 4000S - Desktop PC

Reviews:

Related manuals for Deskpro 4000S - Desktop PC

Brands by name

Popular brands

Compaq Deskpro 4000S - Desktop PC, Reference Manual

Search results

Summary of Contents for Deskpro 4000S - Desktop PC

Reviews:

Related manuals for Deskpro 4000S - Desktop PC

Brands by name

Popular brands