Compaq Deskpro 4000N - Desktop PC, Maintenance & Service Manual

Page: 89 / 174

Compaq Deskpro 4000S and 4000N Personal Computers 5-15
5.11 Easy Access Power Supply
To remove the Easy Access Power Supply, complete the following steps:
1. Prepare the computer for disassembly (Section 5.4).
2. Remove the system unit cover (Section 5.7).
3. Remove the expansion board cage (Section 5.9).
✎
The power cord must be removed from the computer before the power supply can be rotated to
an upright position.
4. Disconnect the power cables from the drives.
It is not necessary to remove the hard drive
1
, diskette drive
2
, or CD-ROM drive
3
ribbon
cables from the system.
5. Release the power cables from the cable tie on the side of the chassis.
Figure 5-11. Positioning the Cables on the Rear of the Drive Cage (Deskpro 4000S Shown)