3-17
Compaq Professional Workstation 5100 Reference Guide
Writer: Erica T Blakeney Project: Compaq Professional Workstation 5100 Reference Guide Comments: 299348-003
File Name: D-CH03.DOC Last Saved On: 3/12/98 11:40 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Smart Cover Sensor
Smart Cover Sensor is a combination of hardware and software technologies
that can alert you when the workstation cover has been removed. The following
table describes three levels of protection.
Table 3-3
Smart Cover Sensor Protection Levels
Level
Setting
Description
Level 0
Disabled
Smart Cover Sensor is disabled.
Level 1
Notify User
When the workstation is restarted, the screen displays
a message indicating that the workstation cover has
been removed.
Level 2
Setup Password
When the workstation is restarted, the screen displays
a message indicating that the workstation cover has
been removed. You must enter the Setup Password to
continue.
The following elements determine the behavior of the Smart Cover Sensor:
■
SW1-S1 (Switch 1 of Switch Block 1)—See the hood labels affixed to
the underside of the workstation cover if you need help locating the
switch on the system board.
■
The Setup Password—See “Setup Password” or “Clearing a Setup
Password” in this chapter to enable or disable the Setup Password.
■
The Smart Cover Sensor setting—Three settings are possible:
Disabled, Notify User, and Setup Password. See “Setup Password” in
this chapter to select the desired setting.
See Appendix G for a summary of the Smart Cover Sensor functions based on
the above three elements.
