3-8
Security Features
Writer: Erica T Blakeney Project: Compaq Professional Workstation 5100 Reference Guide Comments: 299348-003
File Name: D-CH03.DOC Last Saved On: 3/12/98 11:40 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
5. From the Computer Setup main menu, select the Security Management
feature under Built-In Devices.
6. Locate the Setup Password option and follow the instructions on the
screen to enable it.
7. Save the configuration and exit the Computer Setup utility.
Entering the Setup Password
To enter the Setup Password, follow these steps:
1. Turn on the workstation.
2. When the cursor appears in the upper-right corner of the screen, press
F10.
NOTE
: The cursor displays in the upper-right corner of the screen for
approximately two seconds. If you do not press
F10
during this time, you must
turn the workstation off, then on again to access the utility.
3. When the key icon (
) appears, enter your current Setup Password
carefully.
NOTE
: Be sure to enter the Setup Password, not the Power-On Password.
Type carefully; for security reasons, the characters you type do not appear on
the screen. If you enter the Setup Password incorrectly, a broken key icon
(
) appears. Try again. After three unsuccessful tries, you will be allowed to
view the current computer settings, but you will not be able to edit or change
the settings. If you only want to view the current computer settings, press
Enter
.
