7-6
Hardware Upgrade Preparations
Writer: Erica T Blakeney Project: Compaq Professional Workstation 5100 Reference Guide Comments: 299348-003
File Name: H-CH07.DOC Last Saved On: 3/12/98 11:50 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Removing the Front Bezel
To install optional drives, remove the front bezel to gain access to the slide-out
drive cage.
CAUTION:
Before removing the workstation cover and front
bezel, ensure that the workstation is turned off and that the power
cord is disconnected from the electrical outlet.
To remove the front bezel:
1. Turn off the workstation and any external devices.
2. Disconnect the power cord from the electrical outlet.
3. Remove the workstation cover.
4. Press up on the top release latches. (Press down on the bottom release
latches.)
Figure 7-3. Locating the front bezel release latches
