3-12
Security Features
Writer: Erica T Blakeney Project: Compaq Professional Workstation 5100 Reference Guide Comments: 299348-003
File Name: D-CH03.DOC Last Saved On: 3/12/98 11:40 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
4. On SW1, move switch 1 to the ON position (not shown).
IMPORTANT:
Switch 1 has a default setting of OFF. When the switch is
OFF, your system is password-protected. To re-enable password protection,
you MUST return the switch to its
default
position later in this procedure.
5. Restart the workstation to erase your password from system memory.
NOTE
: Clearing the Setup Password will also clear the Power-On Password.
Be sure to reestablish your Power-On Password after clearing the Setup
Password.
6. Turn off the workstation once more.
7. Return switch 1 to its original default (OFF) position.
8. Reassemble and restart the workstation.
9. Establish a new Setup Password, if desired.
Advanced Security Management
The following security features can be accessed through the Computer Setup
option on the Compaq Utilities menu.
■
Disable removable media boot ability
■
Disable removable media write ability
■
Disable serial port
■
Disable parallel port
■
QuickLock/QuickBlank
■
Smart Cover Sensor
NOTE
: QuickLock/QuickBlank must be used in combination with a Power-On or
Setup Password.
