Managing the System Remotely
B-9
status
The status command displays the current state of the system sensors, as well as the
current escape sequence and alarm information. The following is an example of the
display.
RCM>status
Firmware Rev: V2.0
Escape Sequence: ^]^]RCM
Remote Access: ENABLE
Temp (C): 26.0
RCM Power Control: ON
RCM Halt: Deasserted
External Power: ON
Server Power: ON
RCM>
The status fields are explained in Table B-2.
Table B-2 RCM Status Command Fields
Item
Description
Firmware Rev:
Revision of RCM firmware.
Escape Sequence:
Current escape sequence to invoke RCM.
Remote Access:
Modem remote access state. (ENABLE/DISABLE)
Temp (C):
Current system temperature in degrees Celsius.
RCM Power Control:
Current state of RCM system power control. (ON/OFF)
RCM Halt:
Asserted indicates that halt has been asserted with the
haltin command. Deasserted indicates that halt has
been deasserted with the haltout command or by
cycling power with the On/Off button on the control
panel. The RCM Halt: field does not report halts
caused by pressing the Halt button.
External Power:
Current state of power to RCM. Always on.
Server Power:
Indicates whether power to the system is on or off.
