Removal and Replacement
4-19
Removal
1.
Shut down the operating system and turn the system off.
2.
Expose the power section of the system (see Section 4.3).
3.
Unplug the AC power cord. (Auxiliary power is applied to the server feature
module and parts of the system board even when the system is turned off.)
4.
Unplug all the cables to the power supply and unplug the power cables to the
transition module.
5.
Remove the four screws at the back of the system cabinet and the single screw at
the back of the power supply that hold the power supply in place.
6.
If you are removing power supply 0, slide the supply out the side of the cabinet.
If you are removing power supply 1, lift the supply out the top of the cabinet.
Replacement
Reverse the steps in the Removal procedure.
Verification
Power up the system.
