Removal and Replacement
4-41
Removal
1.
Shut down the operating system and turn the system off.
2.
Unplug the AC power cords.
3.
Expose the power section of the system. See Section 4.3.
4.
Remove the power and signal cables from the UltraSCSI bus extender on the side
of the StorageWorks shelf.
5.
The UltraSCSI bus extender is mounted on plastic standoffs to which it snaps.
Pinch each snap with a pair of needle nose pliers, free the corners, and pull the bus
extender off.
Replacement
Reverse the steps in the Removal procedure.
Verification
Power up the system. Use the show device console command to verify that the
StorageWorks shelf is configured into the system.
