Removal and Replacement
4-17
Removal
1.
Shut down the operating system and turn the system off.
2.
Unplug the AC power cords. (Auxiliary power is applied to the server feature
module and parts of the system board even when the system is turned off.)
3.
Expose the card cage section of the system (see Section 4.3).
4.
Unplug all cables connected to the server feature module.
5.
Pinch each plastic snap holding the transition module in place with a pair of
needle-nose pliers and pull the module away from the frame so each snap is
closed and no longer grips the module.
6.
Once all the snaps are released, gently pull the module off the snaps and remove
the module.
Replacement
Reverse the steps in the Removal procedure.
Verification
Power up the system.
