Halts, Console Commands, and Environment Variables
A-7
Table A-2 Summary of SRM Console Commands (Continued)
Command
Function
login
Turns off secure mode, enabling access to all SRM console
commands during the current session.
man
Displays information about the specified console command.
more
Displays a file one screen at a time.
prcache
Initializes and displays status of the PCI NVRAM.
set envar
Sets or modifies the value of an environment variable.
set host
Connects to an MSCP DUP server on a DSSI device.
set password
Sets the console password or changes an existing password.
set rcm_dialout
Sets a modem dialout string.
set secure
Enables secure mode without requiring a restart of the console.
show envar
Displays the state of the specified environment variable.
show config
Displays the configuration at the last system initialization.
show cpu
Displays the state of each processor in the system.
show device
Displays a list of controllers and their devices in the system.
show fru
Displays the serial number and revision level of all options.
show memory
Displays memory module information.
show network
Displays the state of network devices in the system.
show pal
Displays the version of the privileged architecture library code
(PALcode).
show power
Displays information about the power supplies, system fans,
CPU fans, and temperature.
show rcm_dialout
Displays the modem dialout string.
show version
Displays the version of the console program.
start
Starts a program previously loaded on the processor specified.
stop
Halts the specified processor. (Same as halt.)
test
Runs firmware diagnostics for the system.
