B-4
AlphaServer DS20 Service Manual
B.2.1
Using RCM Locally or with a Modem on COM1
Use the default escape sequence to invoke the RCM mode locally for the first time.
You can invoke RCM from the SRM console, the operating system, or an
application. The RCM quit command reconnects the terminal to the system console
port.
1.
To invoke the RCM locally, type the RCM escape sequence. See
➊
in Example
B–1 for the default sequence.
The escape sequence is not echoed on the terminal or sent to the system. At the
RCM> prompt, you can enter RCM commands.
2.
To exit RCM and reconnect to the system console port, enter the quit command
(see
➋
). Press Return to get a prompt from the operating system or system
console.
Example B–1 Invoking and Leaving RCM Locally
P00>>> ^]^]rcm
➊
RCM>
RCM> quit
➋
Focus returned to COM port
