Mini
-
OTE 300 Installation Guide
All
trademarks used in this publication are CommScope registered
201
9
CommScope Inc. All rights Reserved
47
7.2.3 External ground connection is to be placed in designated location. The ground wire is to be secured using the
same bolt that is used to secure the cable retention assembly. See photo 164.
Caution:
Do not use braided or stranded ground wire when installing a ground through a port on the
Mini-OTE 300 closure. A solid ground wire is required to prevent a leak path and make a proper seal.
7.3 CABLE RETENTION
7.3.1 Open hose clamp on cable retention assembly. Place cable retention assembly around cable. If cable is
shielded and to be grounded, orient the sheath opening, which exposes the shielding, toward the base of
retention clamp. See photos 165-166.
7.3.2 Insert strength member(s) into lug and hand tighten screw with the tool provided. See photo 167.
Strength members
inserted into lug.
Photo # 167
Position for external
ground. Secure with
bolt.
Photo # 164
Open hose
clamp. Place
around cable.
Cable retention assembly
Photo # 165
Photo # 166
Caution:
Cable sheath opening
positioned downward.
Caution:
Tighten lug
with nut in downward
position
