Mini-OTE 300 Installation Guide
All trademarks used in this publication are CommScope registered
201
9
CommScope Inc. All rights Reserved
82
11.4.2 Examine the end of the drop cable connector and determine which is the high side and which is the low side of
the connector end-face as shown in Figure 18.
11.4.3 Locate the cleaning tape cassette that is provided with the cleaning kit.
11.4.4 Open the tape shutter by squeezing the lever on the underside of the cassette and then keep the shutter open
by continuing to squeeze the lever.
11.4.5 Hold the end-face of the drop cable connector perpendicular to the cleaning tape and with the high side of the
connector pointing in the direction of cleaning as shown in Figure 19.
Note:
The drop cable connector uses angled SC type connectors. Make sure the high
side of the connector end-face is pointing in the direction of the cleaning motion.
Figure 18 Angled Connector End-Face Detail
Figure 19 Cleaning Drop Cable Connector
CLEANING
CASSETTE
DIRECTION OF
CLEANING
