38
6.3 CABLE RETENTION
6.3.1 If LBT cable,
remove any dummy buffer tubes by cutting at cable sheath opening. See photo 124.
6.3.2 Open hose clamp on cable retention assembly. Place cable retention assembly around cable. If cable is
shielded and to be grounded, orient the sheath opening, which exposes the shielding, toward the base of
retention clamp. See photos 125-126.
6.3.3 Insert strength member(s) into lug and hand tighten screw with the tool provided. See photo 127.
Photo # 124
Cut dummy LBT.
Open hose
clamp. Place
around cable.
Cable retention assembly
Photo # 125
Photo # 126
Strength members
inserted into lug.
Photo # 127
Mini
-
OTE 300 Installation Guide
All
trademarks used in this publication are CommScope registered
201
9
CommScope Inc. All rights Reserv
ed
Caution:
Cable sheath opening
positioned downward.
Caution:
Tighten lug
with nut in
downward position
