Comau C3G Plus, Operation And Maintenance Manual, Page: 89 / 266

The TEACH command cannot be used at the same time as the PROGRAM EDIT (DATA mode), MEMORY
DEBUG or EZ environment commands when memory, system or programme protection is enabled or if the
controller is in FATAL status.
Syntax: MT <programme_name>
View
Program Type Variable
Debug Erase Load Rll Save Teach View
The VIEW command displays a menu of commands to display the contents of the memory.
All MEMORY VIEW commands support the /NOPAGE option.
·
Program displays information about loaded programmes and memory statistics, as follows:
- programme name
- programme attributes (H=hold, N=nohold, A=attach, D=detach)
- name of data file used in load (-= not loaded from a file)
- size of programme code (0 = not loaded)
- size of data (0 = not loaded)
- creation date and time of the .COD file and .VAR file that were initially loaded in the memory for this
programme. It is necessary to issue the /Full option to obtain this information.
·
a symbol indicating if the loaded instructions or variables have been modified in memory but not saved
on the RAM disk. Issuing this command from the CRT/keyboard or from SYS_CALL, this symbol is dis-
played next to the code and variable sizes. If the command is issued from the programming terminal, the
/Full option must also be issued. The symbols used are the following:
“S” indicates that the program code or the variables have been saved
“*” indicates that the program code or variables have been modified but not saved
“-” indicates that the program code or variables have not been loaded in memory
“p” indicates that the program code has been loaded from SYS.CALL with the /Nosavevars option
If the programme name is not specified as parameter, information for all loaded programmes is dis-
played. The asterisk can be used.
Options: /Full displays information on the programme.
/Nopage
/4
Syntax: MVP <programme_name>
·
Type displays types of user-defined data, as follows:
- data type name
- byte size
- reference counter (number of programmes and variables referring to the data type)
- number of fields
- structure type (record or node)
- description of fields (name and data type information for each field)
C3G
Plus
OPERATOR INTERFACE
07/1200 3-41
MEMORY
COMMAND