Comau C3G Plus, Operation And Maintenance Manual, Page: 85 / 266

·
Install makes it possible to install a certain application programme performing all the operations re-
quired automatically: identification of the backup device from which to copy the files, installation of the
Kermit protocol (if necessary), copy of the installation file of the application programme on the RAM disk
and its activation.
As parameter, it requests the name of the application programme installation file (for example
EZ_INST.COD for the EZ application) which can also be selected pressing the HELP key in response to
the prompt asking for the name of the installation file.
Syntax: FUI <installation_file>
If you want to install the applications through the Ethernet network, first configure the vari-
ables, which have the prefix $NET_ and hold the HOST references storing the files of the
required application.For further details about the configuration of the Ethernet network,
please refer to the “Manual for communications through field bus and Ethernet network”.
·
Restore makes it possible to copy files from the default backup device to the default device. Both de-
vices form part of the predefined variable $DFT_DV and can be set using PDL2 assignment instruction.
Where necessary, the Kermit protocol is installed automatically.In order to copy all the files (this copying
operation is carried out even if no file is specified as a parameter), the file C3G.SYS present on the
backup device is copied and given the new name C3G.OLD.
Option: /Configure loads the old configuration file C3G.OLD and saves it as C3G.SYS. It is wise
to follow this command with Restart Cold to make the data file operational.
Syntax: FUR <file_name>
·
Search allows the user to find a string in a file on the RAM DISK.
A file specification and a string must be given. The file specification can contain the asterisk.
Syntax: FUS <file_name> <search_string>
·
Verify is used to check the integrity of the binary files (.COD, .VAR, .SYS and .CPK) on the RAM
DISK. Also when there is an asterisk in the specification of the filename and the extension, the com-
mand will operate on the binary files only.
Syntax: FUV <file_name>
View
The VIEW command displays the directory of a secondary storage device. The directory is a list of the files
stored on the device. For each file, the name, extension, byte size and creation date are given. If this file has
the Readonly or the System attribute, such condition is pointed out by the letter ‘r’ or ‘s’ respectively.This in-
formation is not given in case the command is sent from SYS.CALL.From the program PDL2 , use the
pre-set routine FL_STATE in order to know the attributes of a file. The number of unused bytes for the de-
vice is also displayed.
A file specification parameter can be used to specify a particular file or group of files. The asterisk is allowed
for the file name and extension. If no parameter is specified, all files are listed.
Options: /Nopage
Syntax: FV <file_name>
C3G
Plus
OPERATOR INTERFACE
08/0702 3-37
FILER
COMMAND