ComAp IG-NT GC, Reference Manual

Page: 202 / 260

IGS-NT-BC, SW Version 1.2.0,
©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
202
Binary input: ExtValue1reset
Related FW 3.0
Description The ExtValue 1 is reset to it's default value when this input is activated and held
there until the input is deactivated. The default value is given by the setpoint
ExtValue1deflt .
While the reset input is active:
•
The value does not respond to up and down inputs.
•
The value does not accept new data that are written remotely from a
remote terminal using the
ExtValue command.
N
OTE
:
Configuring of the reset input does not block writing the ExtValue remotely, in
comparison to the up and down inputs, which does. However, if the reset input is
active, the remotely written data are not accepted.
Binary input: ExtValue2reset
Related FW 3.0
Description The ExtValue 2 is reset to it's default value when this input is activated and held
there until the input is deactivated. The default value is given by the setpoint
ExtValue2deflt .
While the reset input is active:
•
The value does not respond to up and down inputs.
•
The value does not accept new data that are written remotely from a
remote terminal using the
ExtValue command.
N
OTE
:
Configuring of the reset input does not block writing the ExtValue remotely, in
comparison to the up and down inputs, which does. However, if the reset input is
active, the remotely written data are not accepted.
Binary input: ExtValue3reset
Related FW 3.0
Description The ExtValue 3 is reset to it's default value when this input is activated and held
there until the input is deactivated. The default value is given by the setpoint
ExtValue3deflt .
While the reset input is active:
•
The value does not respond to up and down inputs.
•
The value does not accept new data that are written remotely from a
remote terminal using the
ExtValue command.
N
OTE
: