IGS-NT-BC, SW Version 1.2.0,
©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
215
6
0
1
1
7
1
1
1
N
OTE
:
"0" in the table means the input is not active or not configured.
N
OTE
:
Language index 0 selects the default language of the terminal, i.e. the language,
which is adjusted in the terminal using it's menus.
N
OTE
:
The reaction on changes of these inputs is delayed about 1 sec to ensure the new
combination is valid (e.g. if a rotary selector switch is used).
C
AUTION
!
Each language change causes the reinitialization of the display. Function of the
controller is not influenced.
Binary input: Lang sel int B
Related FW
3.0
Description
This is one of three binary inputs
used for selecting language of the
built-in
IG-NT terminal (display). As the IS-NT
does not have built-in terminal, this input is assigned to the terminal (display) #1,
which is supposed to be directly attached to the controller or mounted close to it.
N
OTE
:
Using these inputs for language selection is an option only. If the inputs are not
configured, the language can be selected using the menus on the terminal.
E
NCODING TABLE
L
ANGUAGE INDEX
I
NPUT
A
I
NPUT
B
I
NPUT
C
0
0
0
0
1
1
0
0
2
0
1
0
3
1
1
0
4
0
0
1
5
1
0
1
6
0
1
1
7
1
1
1
N
OTE
:
"0" in the table means the input is not active or not configured.
N
OTE
:
Language index 0 selects the default language of the terminal, i.e. the language,
which is adjusted in the terminal using it's menus.
N
OTE
:
