List of events
98-165591-B
Appendix B: System messages
B-5
BBBB
08109-0
ERROR
Antenna XIM
data
There is a mismatch in the antenna configuration data.
Either the PCM or the VIM in the antenna are
malfunctioning or one of them has been replaced. In the
latter case, select which is the original device in the web
interface and restart the system.
0810A-0
ERROR
ADM production
data
Production data has been corrupted.
0810B-0
ERROR
Antenna
software version
An error has occurred during upload of software to the
antenna, the antenna software version is not as expected.
Either the software in the ACU does not meet the
minimum version required by the antenna, the software
image in the ACU is corrupted or the upload procedure
failed because of a communication error.
0810C-0
ERROR
File system
integrity
One or more file system partitions are corrupt. You may
have lost your settings and collected statistics. If restarting
the system does not help, contact your service partner.
0810E-0
ERROR
RF calibration
The RF calibration is not valid.
08800-0
ERROR
Internal power
supply
An internal power supply voltage is outside its allowed
range.
08801-0
ERROR
Input voltage too
low
The input voltage to the power supply is too low. If running
on battery, charge battery for correct operation.
08802-0
ERROR
Input voltage too
high
The input voltage to the power supply is too high. If
running on generator or inverter, check for correct
operation.
08840-0
WARNING Master PLL lock
The master PLL has lost lock. Check the input reference
signal.
08841-0
ERROR
Tuner lock
The internal tuner PLL was unable to lock.
08842-0
WARNING GSC
demodulator
The GSC demodulator has reported an error.
08843-0
WARNING DVBS
demodulator
The DVBS demodulator cannot be initialised and loaded
correctly.
08844-0
WARNING BUC voltage
The BUC voltage is out of range.
08845-0
WARNING LNB voltage
The LNB voltage is out of range. The LNB might be
switched off to protect the power supply circuitry.
Reactivate satellite profile to try again, check LNB cable and
surroundings if the problem persists.
Event ID
Severity
Description
Explanation
