List of events
98-165591-B
Appendix B: System messages
B-11
BBBB
0A050-0 ERROR
Azi DDM
communication
Communication error between PCM and azimuth
DDM/DMD/FDM. Check SUB-D connectors and cables.
0A051-0 ERROR
Xel DDM
communication
Communication error between PCM and cross-elevation
DDM/DMD/FDM. Check SUB-D connectors and cables.
0A052-0 ERROR
Ele DDM
communication
Communication error between PCM and elevation
DDM/DMD/FDM. Check SUB-D connectors and cables
0A053-0 ERROR
ISM
communication
Communication error between PCM and ISM. Check SUB-D
connectors and cables.
0A054-0 ERROR
PMM
communication
Communication error between PCM and PMM. Check SUB-D
connectors and cables.
0A055-0 WARNING Azi DDM
warning
The azimuth motor controller has temporarily observed an
unusual situation for temperature, voltage, current or
velocity. No user interaction required.
0A056-0 WARNING Xel DDM
warning
The cross-elevation motor controller has temporarily
observed an unusual situation for temperature, voltage,
current or velocity. No user interaction required.
0A057-0 WARNING Ele DDM
warning
The elevation motor controller has temporarily observed an
unusual situation for temperature, voltage, current or
velocity. No user interaction required.
0A058-0 WARNING PMM warning
The polarisation motor controller has temporarily observed
an unusual situation with regards to temperature, voltage,
current or velocity. No user interaction required.
0A059-0 WARNING Azi cal. limits
Check limits of the calibration result for the azimuth axis are
exceeded. Pointing performance may be degraded. Info:
0x00000040: End stop detected before expected limit
0x00000100: Zero width is low 0x00000200: Zero width
is high 0x00000400: Zero slack is high 0x00001000:
Friction average is high 0x00002000: Friction peak is
high 0x00004000: Friction asymmetry is high Zero width
low/high: Zero reference module placement may be
incorrect. Zero slack high: Mechanical slack may be too high.
Friction average/peak high: Mechanical friction is higher than
expected. Friction asymmetry high: Mechanical imbalance
may be too high.
0A05A-0 WARNING Xel cal. limits
Check limits of the calibration result for the cross-elevation
axis are exceeded. Pointing performance may be degraded.
Info: See 0A059-0.
0A05B-0 WARNING Ele cal. limits
Check limits of the calibration result for the elevation axis are
exceeded. Pointing performance may be degraded. Info: See
0A059-0.
Event ID
Severity
Description
Explanation
