List of events
98-165591-B
Appendix B: System messages
B-3
BBBB
08073-0
WARNING Slave connection The system is configured as a dual antenna master, but no
dual antenna slave is connected to it. Either disable the
dual antenna master in the web interface or configure a
another system as a dual antenna slave.
08074-0
WARNING Master
connection
The system is configured as a dual antenna slave, but it was
not possible to connect to the dual antenna master. Check
that the IP address entered in the modem profile is correct
and check that the master and slave systems are physically
connected as described in the manual.
08075-0
WARNING Rx cable
calibration
The calibration of the ACU-antenna cable failed. The cable
could be defective, too long, of too poor quality, not
properly connected, or the VIM or ACU hardware could be
defective.
08076-0
WARNING Dual mode
configuration
The system is configured as a dual antenna system, but the
system setup is invalid. The dual mode function may not
work properly or performance could be degraded. Info
code: xxxxxxx1 = Antenna types are different, they must
be identical xxxxxxx2 = Master or Slave hardware does not
support dual mode operation. xxxxxxx3 = Software version
on master and slave are different, they must be identical.
08078-0
WARNING VMU TX
frequency invalid
The satellite modem did not provide a Tx frequency, or it is
invalid. A default Tx frequency is assumed, but this may
degrade Tx performance. To remove this warning re-
configure the modem to provide the correct Tx frequency.
08079-0
WARNING ACU Fan
Internal fan is malfunctioning.
0807A-0
WARNING Automatic
azimuth
calibration
pending
Automatic azimuth calibration mode is enabled. The
system tries to perform an azimuth calibration using the
target satellite whenever satellite data is received from the
modem. After successful calibration the feature is
automatically disabled and the system returns to normal
operation. WARNING: If a system has not completed
azimuth calibration after the installation, the blocking
zones may appear to be at wrong angles.
0807B-0
WARNING OTC required
(Calibration
outdated)
BUC calibration is outdated. Rerun it from the Core Module
by using the One Touch Commissioning in the web
interface.
0807C-0
ERROR
System
configuration
Invalid ACU / antenna combination.
Event ID
Severity
Description
Explanation
