Monitor configuration
CNAP
®
Monitor 500
Page 4-9
Version 5.2.5,
h
21-FHZU-10002
brachial-radial)
d)
During the initialization of CNAP
®
measurement, at the start of measuring or
change of finger, the non-calibrated and then the measured blood pressure signal
will be displayed (blood pressure waveform – see illustration 20 below). In order to
avoid misinterpretation, the scale of the blood pressure waveform will be blanked
in the meantime.
Illustration 24: CNAP calibration
4.6
Interfaces (optional)
On the right side of the CNAP
®
Monitor 500, the following connectors can be found (see chapter
3.2.1 - illustration 3):
4.6.1
AUX Analog Out (analog output port)
The AUX Analog Out (analog output port) is not available for the CNAP
®
Monitor 500i. The following
parameters are available as analog signals from the device's analog output port (see chapter
17.2):
o
Calibrated blood pressure wave
o
Mean arterial blood pressure (MAP)
o
Pulse Rate (PR)
o
Cardiac Output (CO)
o
Stroke Volume (SV)
o
Systemic Vascular Resistance (SVR)
o
Pulse Pressure Variation (PPV)
o
Stroke Volume Variations (SVV)
Distributed by BIOPAC Systems, Inc.
Manufactured by CNSystems AG
