Enter the module’s OBM IP
address, then press Return.
DECrepeater 90TS Installation and Configuration
43
Configuring the Module (Cont.)
[11] Set Out-of-Band Management (OBM) Interface IP Address
NOTE:
This selection is operational only when the module is
installed into a DEChub 90 or as a standalone unit.
This option prompts you to enter the IP address of your out-of-band management
interface.
This option allows you to manage your module through the front-panel serial port
when the module is installed in a DEChub 90 or as a standalone unit. You can enable
out-of-band management in addition to normal in-band management. To enable
out-of-band management, you need to assign an OBM IP address (use Option
[11]
)
and select an OBM port speed (use Option
[12]
) from the
DECrepeater 90TS
Installation Menu
.
The following is an example of the dialog associated with this option (user response
is shown in boldface type):
Enter selection : 11
DECrepeater 90TS
SET OUT-OF-BAND MANAGEMENT (OBM) INTERFACE IP ADDRESS
Format: The standard 4 octet dotted decimal notation in which
each octet of the address is represented as a decimal
value, separated by a ’.’ character.
example: 16.20.40.156
To delete the IP address, enter 0 in the appropriate
address field.
IP address [] : 16.20.54.156
Return
Press Return for Main Menu ...
