Appears only if the module has
been previously configured.
Enter the SNMP trap address that you have
chosen for deletion, then press Return.
DECrepeater 90TS Installation and Configuration
29
Configuring the Module (Cont.)
[6] Delete SNMP Trap Addresses
This option prompts you to select SNMP trap addresses for deletion.
The format for an SNMP trap address is the standard 4-octet dotted decimal notation,
where each octet of the address is represented as a decimal value, separated by a
decimal point (.).
The following is an example of an SNMP trap address:
16.20.54.156
The following is an example of the dialog associated with this option (user response
is shown in boldface type):
Enter selection : 6
DECrepeater 90TS – slot 3
DELETE SNMP TRAP ADDRESSES
Format: The standard 4 octet dotted decimal notation in which
each octet of the address is represented as a decimal
value, separated by a ’.’ character.
example: 16.20.40.156
Configured SNMP Trap Addresses: 16.20.216.81
Trap address [] : 16.20.216.81
Return
Trap address deleted. Delete another? [] :
Return
Press Return for Main Menu ...
