This cell data represents a
previously set IP address.
During the initial setup, this
cell default appears as
[].
Enter the module’s IP address,
then press Return.
DECrepeater 90TS Installation and Configuration
31
Configuring the Module (Cont.)
[8] Set In-Band Interface IP Address
This option prompts you to enter the module’s IP address.
The format for an IP address is the standard 4-octet dotted decimal notation, where
each octet of the address is represented as a decimal value, separated by a decimal
point (.).
The following is an example of an IP address:
16.20.54.156
The following is an example of the dialog associated with this option (user response
is shown in boldface type):
Enter selection : 8
DECrepeater 90TS – slot 3
SET IN-BAND INTERFACE IP ADDRESS
Format: The standard 4 octet dotted decimal notation in which
each octet of the address is represented as a decimal
value, separated by a ’.’ character.
example: 16.20.40.156
To delete the IP address, enter 0 in the appropriate
address field.
IP address [16.20.216.179] : 16.20.54.156
Return
IP Address set
Press Return for Main Menu ...