13
DECrepeater 90TS Installation and Configuration
Installing the Module (Cont.)
Installing the Module into a DEChub 90
The DECrepeater 90TS hot-swap feature allows you to install the module into the
DEChub 90 without turning off power. Seating the module initiates the powerup
sequence.
1
Seat the module into the
DEChub 90.
a. Place the module’s mounting
tab into the mounting slot of the
DEChub 90.
b. Pivot the module on the mount-
ing tab and align the connec-
tors.
c. Firmly push the module onto the
backplane connectors until the
release lever clicks.
d. Press down on the release lever
to ensure that it is locked.
LKG–8837-93I
Mounting
tab
Release lever clicks
when module is
seated.
