4
NX603/FX503
English
do so might cause fire or electric shock.
Do not use benzene or paint
thinner, car cleaner, polish spray,
or similar fluids.
Use of these fluids inside the vehicle will, for
example, cause inflammable gas to ignite
and cause fire.
Also, use of these for daily care of this
product will deform material or cause paint
to peel off.
Do not leave microSD memory
cards within the reach of children.
They might swallow them by mistake. Get
medical treatment immediately if anyone
swallows a microSD memory card.
CAUTION
Ask a professional engineer
to install, remove, change
installation or wire the unit.
Installation and wiring must be done
correctly. If it is installed or wired incorrectly,
it may interfere with driving and cause an
accident or malfunction.
Do not use the main unit except
in a vehicle.
Doing so may cause injury or electric shock.
Set the volume during driving to
a level that allows you to hear
sounds outside the vehicle.
Driving without being able to hear sounds
outside the vehicle might cause an accident.
Do not place objects on the
control panel or subject it to
strong impact
Doing so might cause the control panel or
LCD to malfunction, break or be deformed.
●
Do not place objects on it.
●
Do not press strongly with your hand.
●
Do not hit it with hard objects such as
the tip of a pen, pin or fingernails.
●
Do not splash it with water, juice or other
liquids.
Request and Notice
■
LCD display
●
Small black spots or bright spots
may appear on the screen, this is a
phenomenon unique to LCD monitors,
and is not a malfunction.
●
Do not stick protective sheets, etc.
on the touch panel. This might cause
malfunctions or reduce response time.
When the LCD panel becomes dirty, refer
to “Daily care and handling of main unit.”
p
P.50
■
Operating environment
●
To prevent the battery from going flat,
operate the unit with the engine running.
●
The unit has a high-speed CPU, which
means that the case may get hot. Pay
particular attention to handling the unit
during use or immediately after turning
the engine off.
●
On vehicles with a keyless entry system,
the unit may stop operating if you bring
the key close to it. Also, skipping might
occur if you bring the key close to the
unit or Bluetooth Audio device. If this
happens, move the key away.
●
There may be static or the screen may
be distorted if electrical components that
generate strong electrical noise are used
near the unit. If this happens, either move
the electrical component considered the
cause of the electrical noise away from
the unit or stop using it.
■
Routes
●
When the position of a facility displayed
from the search function is set as it is as
a destination, you may be guided to an
inappropriate location such as the back
of the facility or on to an expressway.
Please understand this and check the
route near the destination.
●
Names may be difficult to understand,
depending on the audio data.
●
When a route cannot be calculated,
move the destination to a main road
nearby and try calculating again. Routes
sometimes cannot be calculated
depending on conditions such as
distance to the destination.
■
Cautions about the Warranty within
the warranty period
●
Contact your retailer about using the
warranty for repairs.
●
You may need to return accessories
when you use the warranty for repairs.
●
Data that could not be saved due to
the unit malfunctioning and data that
has disappeared is not covered by the
Warranty.
●
The Warranty is not applied in the
following cases even within the warranty
period:
s
Careless handling (inappropriate
operations not described in the User’s
Manual, dropping, impact, splashing
with water, etc.)
s
Malfunction and damage caused by
improper repair, modification and
disassembly
s
Malfunction and damage caused
by fire, salt damage, gas damage,
earthquakes, storm and flood damage,
lightning strikes, abnormal voltage,
and other natural disasters
s
Scratching, discoloring and dirt
resulting from use or damages from
improper storage.
■
Copyright
●
Software and data whose copyright
is owned by third parties licensed to
Clarion in accordance with a licensing
agreement is recorded on the unit.
Excluding instances that are clearly
indicated as being permitted in
descriptions in the User’s Manual,
removing, reproducing, or modifying the
software in the unit (including updates
and data) is strictly forbidden by law.
