Cisco UCS C890 M5, Instruction Manual

Page: 39 / 191

Contents Page 40
Attaching the Optional Handles
WARNING: Be sure that the system is empty of all CPU modules, storage modules,
power supplies, PCI-E modules and the PCH module BEFORE lifting (as shown in the
figure above with the chassis empty). These should be installed AFTER the system is
mounted in the rack. Injury and damage may occur if components are not removed
from the rack prior to installation.
7. After pushing the system all the way into the rack, use two roundhead screws on
each side of the server to lock it into place.
8. With the system now secure in the rack, the CPU modules, storage modules,
power supplies, PCI-E modules and the PCH module may all be installed in
the chassis.
Note: Figures are for illustrative purposes only. Always install servers to the bottom of
a rack first.
Warning: Stability hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the floor before you slide the unit out for servicing. Failure to
stabilize the rack can cause the rack to tip over.