Configuring Lines
Configuring Basic or Advanced Call Park Function to a Line Key
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
52
2
STEP 4
In the
Call Progress Tones
section under the
Call Pickup Tone
parameter.
The default value is
440@-10;30(.3/9.7/1)
, same as the call waiting tone.
To configure this parameter by using the configuration file, configure the following
line the profile:
<Call_Pickup_Tone ua="na">440@-10;30(.3/9.7/1)</Call_Pickup_Tone>
STEP 5
Click Submit All Changes.
Configuring Basic or Advanced Call Park Function to a Line
Key
Unused line keys can be enabled to allow call park (for the MetaSwitch soft
switch) on the Cisco SPA300 and SPA500 series phones. Users can press this line
button to park a call or retrieve a parked call.
NOTE
Not available for WIP310, SPA501, SPA502, and SPA301 phones.
•
BroadSoft Advanced Call Park and Recall Support, page 45
•
MetaSwitch Call Park Function Support
For example to configure unused line keys for call park and retrieval on Cisco SPA
525G/SPA525G2 (MetaSwitch):
STEP 1
Click
Admin Login
>
advanced
>
Voice
>
Att(endant) Console
.
STEP 2
In the
General
section under Server Type, choose RFC3265_4236.
STEP 3
Click the Phone tab.
STEP 4
Choose the line key to configure (line 5 in this example):
a. From the
Extension
drop down list, choose
Disabled
.
b. From the
Share Call Appearance
drop-down list, choose
private
.
c. Enter the following string in the Extended Function field:
fnc=prk;[email protected]