manualshive.com logo in svg

Cisco Small Business SPA525G2, Administration Manual, Page: 254 / 371

Share
Download
Cisco Small Business SPA525G2 Administration Manual Download Page 254

Cisco SPA IP Phone Field Reference

SIP Tab

Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

254

A

 

SIP Tab

This section describes the fields for the SIP tab.

SIP Parameters

Parameter

Description

Max Forward

SIP Max Forward value, which can range from 1 to 
255. 

Defaults to 70.

Max Redirection 

Number of times an invite can be redirected to 
avoid an infinite loop. 

Defaults to 5.

Max Auth 

Maximum number of times (from 0 to 255) a 
request may be challenged. 

Defaults to 2.

SIP User Agent Name 

Used in outbound REGISTER requests.

Defaults to $VERSION. If empty, the header is not 
included. Macro expansion of $A to $D 
corresponding to GPP_A to GPP_D allowed.

SIP Server Name 

Server header used in responses to inbound 
responses. 

Defaults to $VERSION.

SIP Reg User Agent Name 

User-Agent name to be used in a REGISTER 
request. If this is not specified, the <SIP User 
Agent Name> is also used for the REGISTER 
request. 

Defaults to blank. 

Summary of Contents for Small Business SPA525G2




















































































































































































































































































































































































Reviews:

No comments