manualshive.com logo in svg

Cisco Small Business SPA525G2, Administration Manual, Page: 177 / 371

Share
Download
Cisco Small Business SPA525G2 Administration Manual Download Page 177

Provisioning

Manually Provisioning a Phone from the Keypad

Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

177

6

 

Cisco WIP310

STEP 1

Press 

Select

  to choose Settings and press 

Select

  again.

STEP  2

Navigate to Misc Settings.

STEP  3

Navigate to profile rule. Enter the profile rule in the following format:

protocol://server[:port]/profile_pathname 

For example, to have the Cisco WIP310 provisioning done by a Cisco SPA9000, 
enter:

192.168.2.64/cfg/generic.xml

STEP  4

Press the Resync softkey.

Cisco SPA525G or Cisco SPA525G2

STEP 1

Press the Setup button.

STEP  2

Navigate to Device Administration and press Select.

STEP  3

Scroll to Profile Rule and press Select.

STEP  4

Enter the profile rule by using the following format.

protocol

://

server[:port]/profile_pathname

 

For example:

tftp://192.168.1.5/spa525.cfg

STEP  5

Press the Resync softkey.

Sample Configuration File

Following is a sample configuration file: 

Set_Local_Date_(mm/dd) "" ;

Set_Local_Time_(HH/mm) "" ;

Time_Zone "GMT-07:00" ; # options: GMT-12:00/GMT-11:00/GMT-10:00/GMT-09:00/

GMT-08:00/GMT-07:00/GMT-06:00/GMT-05:00/GMT-04:00/GMT-03:30/GMT-03:00/GMT-

02:00/GMT-01:00/GMT/GMT+01:00/GMT+02:00/GMT+03:00/GMT+03:30/GMT+04:00/

GMT+05:00/GMT+05:30/GMT+05:45/GMT+06:00/GMT+06:30/GMT+07:00/GMT+08:00/

GMT+09:00/GMT+09:30/GMT+10:00/GMT+11:00/GMT+12:00/GMT+13:00

Summary of Contents for Small Business SPA525G2




















































































































































































































































































































































































Reviews:

No comments