manualshive.com logo in svg

Cisco Small Business SPA525G2, Administration Manual, Page: 362 / 371

Share
Download
Cisco Small Business SPA525G2 Administration Manual Download Page 362

Cisco SPA IP Phone Field Reference

Attendant Console Tab (Cisco SPA500 and Cisco SPA500DS)

Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

362

A

 

SNRM Night Mode LED

(Used with Cisco UC320W.) The SNRM is turned 
on. The system is in night mode.

Parking Lot Idle LED

These parameters are used to define the LED 
pattern when the extension is in the parked state.

By default, when there is a call parked on the 
monitored line (parking lot busy), the phone line 
LED is in a very slow red blinking state (150ms on, 
150ms off). When there is no call parked on the 
monitored line (parking lot idle), the phone line 
LED will be in off (or line idle) state. If the button is 
the primary line, shared line or BLF line, the button 
LED will reflect the current button status and not 
reflect the Parking Lot Idle status if the parking lot 
is idle. If the button is a call park button, the button 
will reflect the Parking Lot Idle or Parking Lot Busy 
statuses.

To define a pattern other than the default (slow 
red blinking), enter a pattern in these fields. See 

Chapter 9, “Configuring LED Patterns.”

Parking Lot Busy LED

BLF Idle LED

Busy lamp field service: the monitored phone or 
line is in the idle state.

BLF Ringing LED

Busy lamp field service: the monitored phone or 
line is in the ringing state.

BLF Busy LED

Busy lamp field service: the monitored phone or 
line is in the busy state.

BLF Held LED

Busy lamp field service: the monitored phone or 
line is in the held state.

Parameter

Description

Summary of Contents for Small Business SPA525G2




















































































































































































































































































































































































Reviews:

No comments