S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
26-8
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 26 Configuring Smart Call Home
Configuring Call Home
Creating a Destination Profile
To create a user-defined destination profile and configure the message format for that new destination
profile, perform this task:
This example shows how to create a destination profile for Call Home:
switch#
configuration terminal
switch(config)#
callhome
switch(config-callhome)#
destination-profile Noc101 format full-text
Modifying a Destination Profile
You can modify the following attributes for a predefined or user-defined destination profile:
•
Destination address—The actual address, pertinent to the transport mechanism, to which the alert
should be sent.
•
Message formatting—The message format used for sending the alert (full text, short text, or XML).
•
Message level—The Call Home message severity level for this destination profile.
•
Message size—The allowed length of a Call Home message sent to the e-mail addresses in this
destination profile.
See the
“Associating an Alert Group with a Destination Profile” section on page 26-9
for information on
configuring an alert group for a destination profile.
Note
You cannot modify or delete the CiscoTAC-1 destination profile.
To modify the attributes for a destination profile, perform this task:
Command
Purpose
Step 1
switch#
configuration terminal
Enters configuration mode.
Step 2
switch(config)#
callhome
Enters callhome configuration mode.
Step 3
switch(config-callhome)#
destination-profile
name
format
{
XML
|
full-txt
|
short-txt
}
Creates a new destination profile and sets the message
format for the profile. The name can be any
alphanumeric string up to 31 characters.
Step 4
switch(config-callhome)#
show callhome
destination-profile
[
profile
name
]
(Optional) Displays information about one or more
destination profiles.
Step 5
switch(config)#
copy running-config
startup-config
(Optional) Saves this configuration change.
Command
Purpose
Step 1
switch#
configuration terminal
Enters configuration mode.
Step 2
switch(config)#
callhome
Enters callhome configuration mode.
Summary of Contents for N5010P-N2K-BE
