S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
18-7
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 18 Configuring
Configuring
The following example shows how to configure global preshared keys:
switch#
configure terminal
switch(config)#
tacacs-server key 0 QsEfThUkO
switch(config)#
exit
switch#
show tacacs-server
switch#
copy running-config startup-config
Configuring Server Preshared Keys
You can configure preshared keys for a server. A preshared key is a shared secret text string
between the Nexus 5000 Series switch and the server host.
To configure the preshared keys, perform this task:
The following example shows how to configure the preshared keys:
switch#
configure terminal
switch(config)#
tacacs-server host 10.10.1.1 key 0 PlIjUhYg
switch(config)#
exit
switch#
show tacacs-server
switch#
copy running-config startup-config
Configuring Server Groups
You can specify one or more remote AAA servers to authenticate users using server groups. All members
of a group must belong to the protocol. The servers are tried in the same order in which you
configure them.
You can configure these server groups at any time but they only take effect when you apply them to an
AAA service. For information on AAA services, see the
“Remote AAA Services” section on page 16-2
.
Command
Purpose
Step 1
switch#
configure terminal
Enters configuration mode.
Step 2
switch(config)#
tacacs-server host
{
ipv4-address
|
ipv6-address
|
host-name
}
key
[
0
|
7
]
key-value
Specifies a preshared key for a specific
server. You can specify a clear text (
0
) or encrypted (
7
)
preshared key. The default format is clear text. The
maximum length is 63 characters.
This preshared key is used instead of the global
preshared key.
Step 3
switch(config)#
exit
Exits configuration mode.
Step 4
switch#
show tacacs-server
(Optional) Displays the server
configuration.
Note
The preshared keys are saved in encrypted
form in the running configuration. Use the
show running-config
command to display the
encrypted preshared keys.
Step 5
switch#
copy running-config
startup-config
(Optional) Copies the running configuration to the
startup configuration.
Summary of Contents for N5010P-N2K-BE
