S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
50-16
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 50 Troubleshooting
Default Settings
•
show platform afm info group-cfg all
•
show platform afm info lop all
•
show platform software altos detail
•
show platform software altos event-history errors
•
show platform software altos event-history msgs
•
show platform software altos ports all
•
show platform hardware altos counters all
•
show platform hardware altos counters interrupts all
•
show platform hardware altos interrupts all detail
Default Settings
Table 50-1
lists the default settings for the features included in this chapter.
Table 50-1
Default Settings for Troubleshooting Features
Parameters
Default
Timeout period to invoke fctrace
5 seconds
Number of frame sent by the fcping feature 5 frames
Remote capture connection protocol
TCP
Remote capture connection mode
Passive
Local capture frame limits
10 frames
FC ID allocation mode
Auto mode
Summary of Contents for N5010P-N2K-BE
