S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
7-10
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 7 Configuring Private VLANs
Verifying Private VLAN Configuration
This example shows how to configure port 1/2 as a promiscuous port associated with the primary VLAN
5 and the secondary isolated VLAN 109:
switch#
configure terminal
switch(config)#
interface
ethernet 1/2
switch(config-if)#
switchport mode private-vlan promiscuous
switch(config-if)#
switchport
private-vlan mapping 5 109
You can only apply this command to a physical interface.
To clear the private VLAN mapping, perform this task:
Verifying Private VLAN Configuration
To display private VLAN configuration information, use the following commands:
The following example shows how to display the private VLAN configuration:
switch#
show vlan private-vlan
Primary
Secondary
Type
Ports
-------
---------
---------------
-------------------------------------------
5
100
community
5
101
community
Eth1/12, veth1/1
5
102
community
5
103
community
5
109
isolated
Eth1/2
switch#
show vlan private-vlan type
Vlan Type
---- -----------------
5
primary
Step 3
switch(config-if)#
switchport mode
private-vlan promiscuous
Configures the port as a promiscuous port for a private
VLAN. You can only enable a physical Ethernet port
as the promiscuous port.
Step 4
switch(config-if)#
switchport
private-vlan mapping
{
primary-vlan-id
}
{
secondary-vlan-list
|
add
secondary-vlan-list
|
remove
secondary-vlan-list
}
Configures the port as a promiscuous port and
associates the specified port with a primary VLAN
and a selected list of secondary VLANs. The
secondary VLAN can be either an isolated or
community VLAN.
Command
Purpose
Command
Purpose
switch(config-if)#
no switchport
private-vlan mapping
Clears the mapping from the private VLAN.
Command
Purpose
switch#
show system internal clis
feature
Displays the features enabled on the switch.
switch#
show vlan private-vlan
[
type
]
Displays the status of the private VLAN.
switch#
show interface switchport
Displays information on all interfaces configured as
switch ports.
Summary of Contents for N5010P-N2K-BE
